Can I have 2 versions of Ranger installed on the same pc?

[wcoleman]

Can I have 2 versions of Ranger installed on the same pc?

[wcoleman]

Yes. The installation of two or more versions of Ranger for different transports on the same PC will not cause any conflicts between the versions.
Please note though that the Ranger installer registers the Ranger control for the transport being installed, and, therefore, only the Ranger version installed last can be used until a different Ranger control is registered.
For example, if Ranger for the CR-180 is installed first and then Ranger for the MVX is installed, the Ranger-based application would work with the MVX scanner but not the CR-180 because Ranger for the CR-180 is no longer registered with Windows. In order for the application to again work with the CR-180, Ranger for the CR-180 must be re-registered using the following steps:

[Windows XP]
1) Close all Ranger based applications.
2) Select [Start Menu].
3) Select [Run].
4) Type 'regsvr32 [Drive]:\[Full path to Ranger.ocx]\Ranger.ocx'.
5) Press 'OK'.

[Windows Vista and 7]
1) Close all Ranger based applications.
2) Browse to the Windows System32 folder
3) Locate the cmd.exe file
4) Right-click on cmd.exe
5) Select "Run as Administrator"
6) Type 'regsvr32 [Drive]:\[Full path to Ranger.ocx]\Ranger.ocx'.
7) Press enter


Please note that the default installation path for the Ranger.ocx file is 'C:\Program Files\Silver Bullet Technology\Ranger\<transport>\API Files\Ranger.ocx'
After pressing 'OK' or hitting enter, above, a prompt will be displayed stating that 'DllRegisterServer in [Entire path and OCX name] succeeded'.

Another method to register the Ranger control for the transport you would like to run is by using the Ranger Control Center tool available on www.sbullet.com.  Please log in and follow the Ranger SDK link.

Ranger^® - The universal check scanner interface
Copyright © 2009 Silver Bullet Technology
www.sbullet.com

[Erik Wesemann]

Ranger v3+ is plug-in based and uses a Ranger core. The Ranger core OCX file is located in the path below.

 32 bit OS
   C:\Program Files\Silver Bullet Technology\Ranger\Ranger.ocx
 64 bit OS
   C:\Program Files (x86)\Silver Bullet Technology\Ranger\Ranger.ocx

Switching between Ranger scanner can be done per the following.

Ranger v2 to v3+	-	Register the Ranger core mentioned above.
Ranger v3+ to v2	-	Register the "Ranger.ocx" appropriate for your scanner.
Ranger v3 +to v3+	-	No action required.

Please keep in mind that Ranger v2 drivers are still actively developed.

Ranger^® - The universal check scanner interface
Copyright © 2017 Silver Bullet Technology
www.sbullet.com